Full nozzle flush, head alignment, and clog removal for Epson & Canon ink tanks.
If your Epson EcoTank or Canon G Series is printing pages with horizontal white lines, the built in 'head cleaning' button isn't going to save you. Pressing it over and over just wastes expensive ink and fills up your waste pad. The issue is dried ink physically blocking the microscopic nozzles in the printhead. We perform a manual, chemical flush using specialized solutions that break down the clogs without stripping the delicate internal lining of the head. It's a meticulous process. After the flush, we realign the head and recalibrate the colours to get the print quality back to factory standards. If you've been using cheap compatible inks or left the printer off for months, this is exactly what you need.
We cover all major manufacturer models. If your brand isn't listed, contact us, we almost certainly cover it.
Select your model and observed symptom below to view our component-level bench restoration cost, turnaround timeline, and your net savings vs. buying a new machine.
Microscopic dried pigment crystals clogging 20-micron piezo jets
Yes. Horizontal white lines are the most common symptom of partially clogged nozzles, and this is almost always fully resolvable with our professional deep cleaning service. The built in head cleaning utility in most printers is not powerful enough to clear severe clogs. Our manual flush process applies significantly more pressure and cleaning solution than the automatic utility.
No. Our cleaning solution is specifically formulated to be safe for piezoelectric print heads used in all Epson EcoTank and Canon PIXMA G series printers. We never use harsh solvents that could damage the delicate nozzle plate.
The full deep cleaning procedure, including the flush cycles, dry time, alignment, and final test print, takes approximately 45 minutes to 2 hours depending on the severity of the clog. We offer same day service for drop in units at our Mumbai workshop.